| ©2011 Mercury Equipment Inc. All Rights Reserved. |
 |
- "X" grind - Enhanced grind geometry significantly
improves out-of-box sharpness with substantial speed
improvement in boring and bias (undercut) modes - Chamfer Chisel™ cutters with special shaped low-
vibration heels offer outstanding performance along with
durability and easy maintenance - Ramp-shaped depth gauges help reduce kickback
without affecting performance - Blued cutters provide superior corrosion resistance
- Vibe-Ban™ chassis design reduces vibration 25% or more
at the handles - LubriLink™ tie straps help keep oil where it's needed - on
the chain - LubriWell™ oil holes help carry oil around the full length
of the guide bar's groove
Features
- 91VX: 3/8" pitch, .050" gauge
- Recommended Saw Size: up to 42cc, Bar Length: up to
18" ( 46cm)
WARNING: This Oregon saw chain is capable of kickback and
could result in serious injury to the saw operator or bystanders.
Do not use this chain unless you are experienced in dealing
with kickback. Saw chain with reduced kickback potential is
available.
Specs
saws in a high-production environment
91VX (Low Profile™) Chain
